Troubleshooting Notes tanker What?
Your location：Home >> NewsWhen you use the machine it may encounter some phenomenon or failure when the following phenomena or failure please provide us with the method according to self-examination treatment to improve your efficiency reduce your losses.
First do not start or intermittent boot
1 put down the oil gun according to the keyboard to see if there is reactive if no response check the power supply is normal.
2 the machine has a power-delay function which last until the next power-off time must be greater than 3 seconds.
Second ○-ring or gasket leak at
1 ○-ring gasket or swollen or damaged in need of replacement and to the ○-ring grease.
2 did not tighten the bolts or shock loose tighten the bolts.
Third the quantitative not boot
1 the quantitative value of less than 0.6 liters can not boot re-enter the larger quantitative values or quantitative refueling.
2 if the quantitative value of the input before the press over price and other function keys you enter the value is not a quantitative value in fact non-quantitative refueling.
Fourth the oil over low heat flow suddenly suddenly small
1 the oil level is too low inhaling large amounts of gas pump increase the level.
2 oil plug such as oil gun dirty filters or solenoid valve not fully open and so clean or replace the foreign body.
Fifth measurement allowed
1 into the air check the pump pipe and the coupling at whether there is leakage.
2 oil containing impurities flow measurement converter causing abnormal wear and tear please check the flow measuring transducer and the friction at the moving parts and if worn or uneven replace or grinding.
3 the sealing ring at the ○-ring is damaged replace
4 the distribution valve sealing surface and the chassis of dirt clean the sealing surface distribution valve and chassis.
